Counter (object)
Counter (property)
Using the “Counter” tab, a [counter](#create payer) and the corresponding [counter readings](#payer reading) can be entered for the unit.
Counters that affect the entire property such as: B. General electricity meters are created in the property.
Single Unit Counter, such as B. apartment water or heat meters are created in the respective unit.
In a meter, all previously recorded meter readings are displayed chronologically.
Using the “+ Record meter reading” button, new meter readings can be recorded for the corresponding meter at any time and documented with photos.
Meters and meter readings of the property are used, for example, for the digital operating cost statement from Immodio.
Create counter
Enter meter data
The data for the respective meter can be recorded in the following window.
Meter type
Select the meter type using the drop-down list provided. Various options are available to you, such as cold water, hot water or heat meters. Make sure you select carefully, as this information is relevant for the operating cost billing via Immodio. You can also manually specify your own meter type that is not included in the preselected list. However, automated operating cost billing is not possible with these types of meters.
Meter number (optional)
The meter number is the unique identifier of a meter and is usually located directly on the meter. It enables clear assignment and is usually required when transmitting meter readings to the energy supplier or network operator.
Location (optional)
The location describes the exact location of the meter within a property or unit (e.g. boiler room, first control cabinet). This information makes it easier to locate the meter during readings or maintenance work.
